1. Kuo,T.-C. ;HsuehJ.-C.;Chiou,C.-Y.; Su,C.-H.; and Lee,J.-T. *Ionically Cross-Linked Polymers as Asymmetric Gel Polymer Electrolytes for Enhanced Cycle Performance of Lithium–Sulfur BatteriesACS Macro Lett. ，2021, 10, XXX, 110–115
2. Duy Le;Chanatip Samart; Lee,J.-Y.;Kotohiro Nomura; Suwadee Kongparakul*Suda Kiatkamjornwong Norbornene-Functionalized Plant Oils for Biobased Thermoset Films and Binders of Silicon-Graphite Composite Electrodes ACS Omega 2020, 5, 46, 29678–29687
3. Kuo, T.-C.; Chiou, C.-Y.; Li, C.-C.; Lee, J.-T. In situ cross-linked poly(ether urethane) elastomer as a binder for high-performance Si anodes of lithium-ion batteries Electrochim. Acta, 2019, 327, 135011
4. Yi-Fei Yang, Chun-Yu Chiou, Chuan-Wen Liu, Cheng-Lung Chen, and Jyh-Tsung Lee Crown Ethers as Electrolyte Additives To Modulate the Electrochemical Potential of Lithium Organic Batteries J. Phys. Chem. C 2019, 123, 21950−21958
5. Bolloju, S.; Chiou, C. Y.; Talapunur, V.; Lee, J. T. “(Pentafluorophenyl)diphenylphosphine as a dual-functional electrolyte additive for high-voltage LiNi0.5Mn1.5O4 cathodes in high-voltage lithium-ion batteries” Electrochim. Acta, 2019, 299, 663-671
6. Huang, L. H.; Chen, D.; Li, C. C.; Chang, Y. L.; Lee, J. T. “Dispersion Homogeneity and Electrochemical Performance of Si Anodes with the Addition of Various Water-Based Binders” J. Electrochem. Soc. 2018, 165, A2239.
7. Rohan, R.; Kuo,T. C.; Chiou, C. Y.; Chang, Y. L.; Lin, C. C.; Lee, J. T. “Low-cost and sustainable corn starch as a high-performance aqueous binder in silicon anodes via in situ cross-linking” J.Power Source 2018, 396, 459
8. Yen, H. X.; Rohan, R.; Chiou, C. Y.; Hsieh, C. J.; Bolloju, S.; Li, C. C.; Yang Y. F.; Ong, C. W.; Lee, J. T. “Hierarchy concomitant in situ stable iron(II)−carbon source manipulation using ferrocenecarboxylic acid for hydrothermal synthesis of LiFePO4 as high-capacity battery cathode” Electrochim. Acta 2017, 253, 164.
9. Rohan, R.; Kuo,T. C.;Chen,M. W.; Lee, J. T. “Nanofiber Single-Ion Conducting Electrolytes: An Approach for High-Performance Lithium Batteries at Ambient Temperature” ChemElectroChem 2017, 4, 1.
10. Bolloju, S.; Rohan, R.; Wu, S. T., ; Yen, H. X. ; Dwivedi, G. D. ; Lin,Y. A. ; Lee, J. T. “A green and facile approach for hydrothermal synthesis of LiFePO4 using iron metal directly” Electrochim. Acta 2016, 220, 164.
11. Li, C. C.; Yang, S. T.; Lee, Y. J.; Lee, J. T.; Hsien, C. J. “Newly designed copolymers for fabricating particles with highly porous architectures” Chem. Mater. 2016, 28, 6089
12. Yang, J. J.; Li, C. C.; Yang, Y. F.; Wang, C. Y.; Lin, C. H.; Lee, J. T. “Superparamagnetic core–shell radical polymer brush as efficient catalyst for oxidation of alcohols to aldehydes and ketones” RSC Adv. 2016, 6, 63472.
R. Rohan; Kuo,T. C.; Lin, J. H.; Hsu, Y. C.; Li, C. C.; Lee, J. T. “Dinitrile–Mononitrile-Based Electrolyte System for Lithium-Ion Battery Application with the Mechanism of Reductive Decomposition of Mononitriles” J. Phys. Chem. C 2016, 120, 6450.
13. Lai, G. W.; Chang, S. J.; Lee, J. T.; Liu, H.; C.C. “Conductive Microcapsules for Self-healing Electric Circuits” RSC Adv. 2015, 5, 104145.
14. Lin, C. H.; Lee, J. T.; Yang, D. R.; Chen, H. W.; Wu, S. T. “Nitroxide radical polymer/carbon-nanotube-array electrodes with improved C-rate performance in organic radical batteries” RSC Adv. 2015, 5, 33044.
15. Wang, Y.S.; Huang, C. M.; Hsieh, H. W.; Lin, Y. F.; Lin, C. Y.; Lee, J. T. “Effect of temperature on the dissolution of solid electrolyte interface on mesocarbon microbeads electrodes in propylene carbonate-based electrolytes” Electrochim. Acta, 2014, 142, 34.
16. Liang, Y. P.; Li, C. C.; Lee, J. T. “Hydrothermal Synthesis of Lithium Iron Phosphate using Pyrrole as an Efficient Reducing Agent.”Electrochim Acta, 2013, 87, 763.
17. Lin, C. H.; Chau, C. M.; Lee, J. T. “Synthesis and Characterization of Polythiophene Grafted with a Nitroxide Radical Polymer via Atom Transfer Radical Polymerization” Polym. Chem., 2012, 3, 1467.
18. Cheng, Y. Y.; Li, C. C.; Lee, J. T. “Electrochemical Behavior of Organic Radical Polymer Cathodes in Organic Radical Batteries with N-butyl-N-methylpyrrolidinium bis(trifluoromethylsulfonyl)imide Ionic Liquid Electrolytes”Electrochim. Acta, 2012, 66, 332.
19. Wu, M. S.; Lin, Y. P.; Lin, C. H.; Lee, J. T. “Formation of Nano-scaled Crevices and Spacers in NiO-Attached Graphene Oxide Nanosheets for Supercapacitors” J. Mater. Chem. 2012, 22, 2442.
20. Hung, M. K.; Wang,Y. H.; Lin, C. H.; Lin, H. C.; Lee, J. T. “Synthesis and Electrochemical Behaviour of Nitroxide Polymer Brush Thin-Film Electrodes for Organic Radical Batteries” J. Mater. Chem. 2012, 22, 1570.
21. Lin, C. H.; Chou, W. J.; Lee, J. T. “Three-Dimensionally Ordered Macroporous Nitroxide Polymer Brush Electrodes Prepared by Surface-Initiated Atom Transfer Polymerization for Organic Radical Batteries” Macromol. Rapid Commun. 2012, 33, 107. Lin, H. C.; Li, C. C.; Lee, J. T. “Nitroxide Polymer Brushes Grafted onto Silica Nanoparticles as Cathodes for Organic Radical Batteries” J. Power Sources. 2011, 196, 8098.
22. Wang, Y. H.; Hung, M. K.; Lin, C. H.; Lin, H. C.; Lee, J. T. “Patterned Nitroxide Polymer Brushes for Thin-Film Cathodes in Organic Radical Batteries” Chem. Commun. 2011, 47, 1249.
23. Chang, S. J.; Li, C. C.; Liao, W. S.; Lee, J. T.”Efficient Hydroxylation of BaTiO3 Nanoparticles by Using Hydrogen Peroxide” Colloids Surf. A. 2010, 361, 143.
24. Lee, J. T.; Wang, F. M.; Cheng, C. S.; Li, C. C.; Lin, C. H. “Low-Temperature Atomic Layer Deposited Al2O3 Thin Film on Layer Structure Cathode for Enhanced Cycleability in Lithium-Ion Batteries” Electrochim. Acta. 2010, 55, 4002.
25. Li, C. C.; Lee, J. T.; Peng, X. W.; Wang, F. M. “Using Poly(4-Styrene Sulfonic acid) to Improve the Dispersion Homogeneity of LiFePO4 Cathodes Based Aqueous Process” J. Electrochem. Soc. 2010, 157, A517.
26. Lee, J. T.; George, M.; Moore, J.; Braun, P. “Multiphoton Writing of Three-Dimensional Fluidic Channels within a Porous Matrix” J. Am. Chem. Soc. 2009, 131, 11294.
27. Wang, F. M.; Lee, J. T.; Cheng, J. H.; Cheng, C. S.; Yang, C. R. “The Network Gel Polymer Electrolyte Based on Poly(acrylate-co-imide) and Its Transport Properties in Lithium-Ion Batteries” J. Solid State Electrochem. 2009, 13, 1425.
28. Chang, S. J.; Liao, W. S.; Ciou, C. J.; Lee, J. T.; Li, C. C. “An Efficient Approach to Derive Hydroxyl Groups on the Surface of Barium Titanate Nanoparticles to Improve Its Chemical Modification Ability” J. Colloid Interface Sci. 2009, 329, 300.
29. Brzezinski, A.; Lee, J. T.; Slinker, J. D.; Malliaras, G. G.; Braun, P. V.; Wiltzius, P. “Enhanced Emission from FCC Fluorescent Photonic Crystals” Physical Review B. 2008, 77, 233106, 1.
30. Chen, Y. C.; Geddes III, J. B.; Lee, J. T.; Braun, P. V.; Wiltzius, P. “Holographically Fabricated Photonic Crystals with Large Reflectance” Appl. Phys. Lett. 2007, 91, 241103.
31. Lee, J. T.; Wang, F. M.; Chu, Y. J.; Yang, C. R.; Li, C. C. “Aqueous Processing of Lithium-Ion Battery Cathodes Using Hydrogen Peroxide-Treated Vapor-Grown Carbon Fibers for Improvement of Electrochemical Properties” J. Mater. Sci. 2007, 42, 10118.
32. Lee, J. T.; Chu, Y. J.; Peng, X. W.; Wang, F. M.; Yang, C. R.; Li, C. C. “A Novel and Efficient Water-Based Composite Binder for LiCoO2 Cathodes in Lithium-Ion Batteries” J. Power Sources. 2007, 173, 985.
33. Li, C. C.; Lee, J. T.; Tung, Y. L. “Effects of pH on the Dispersion and Cell Performance of LiCoO2 Cathodes Based on Aqueous Process” J. Mater. Sci. 2007, 42, 5773.
34. Lu, N.; Ho, Y. M.; Fan, C. W.; Wang, F. M.; Lee, J. T. “A Simple Method for Synthesizing Polymeric Lithium Salts Exhibiting Relatively High Cationic Transference Number in Solid Polymer Electrolytes” Solid State Ionics. 2007, 178, 347.
35. Li, C. C.; Lin, J. L.; Huang, S. J.; Lee, J. T.; Huang, K. Y.; Shih, R. F. “A New and Acid-Exclusive Method for Dispersing Carbon Multi-Walled Nanotubes in Aqueous Suspensions” Colloids Surf. A. 2007, 297, 275.
36. Wu, M. S.; Lee, J. T.; Chiang, P. C. “Carbon-Nanofiber Composite Electrodes for Thin and Flexible Lithium-Ion Batteries” J. Mater. Sci. 2007, 42, 259.
37. Lee, J. T.; Wu, M. S.; Wang, F. M.; Liao, H. W.; Li, C. C.; Chang, S. M.; Yang, C. R. “Gel Polymer Electrolytes Prepared by in situ Atom Transfer Radical Polymerization at Ambient Temperature” Electrochem. Solid-State Lett. 2007, 10, A97.
38. Li, C. C.; Lee, J. T.; Peng, X. W. “Improvements of Dispersion Homogeneity and Cell Performance of Aqueous-Processed LiCoO2 Cathodes by Using Dispersant of PAA-NH4” J. Electrochem. Soc. 2006, 153, A809.
39. Wu, M. S.; Chiang, P. C.; Lee, J. T.; Lin, C. L. “Synthesis of Manganese Oxide Electrodes with Interconnected Nanowire Structure as an Anode Material for Rechargeable Lithium-Ion Batteries” J. Phys. Chem. B. 2005, 109, 23279.
40. Chang, S. M.; Liao, H. W.; Lin, C. L.; Lee, J. T. “Synthesis of Well-defined Block Copolymer Electrolytes Using Atom Transfer Radical Polymerization” Synth. Met. 2005, 154, 21.
41. Li, C. C.; Lee, J. T.; Lo, C. Y.; Wu, M. S. “Effects of PAA-NH4 Addition on the Dispersion Property of Aqueous LiCoO2 Slurries and the Cell Performance of As-Prepared LiCoO2Cathodes” Electrochem. Solid-State Lett. 2005, 8, A509.
42. Lee, J.T.; Wu, M. S. Wang, F M; Lin, Y. W. Bai, M. Y.; Chiang, P. C. “Effects of Aromatic Esters as Propylene Carbonate-Based Electrolyte Additives in Lithium-Ion Batteries” J. Electrochem. Soc. 2005, 152, A1837.
43. Wu, M. S.; Lee, J. T.; Wang, Y. Y.; Wan, C. C. “Field Emission from Manganese Oxide Nanotubes Synthesized by Cyclic Voltammetric Electrodeposition” J. Phys. Chem. B 2004, 108, 16331.
44. Wu, M. S.; Chiang, P. C. J.; Lin, J. C.; Lee, J. T. “Effects of Copper Trifluoromethanesulphonate as an Additive to Propylene Carbonate-Based Electrolyte for Lithium-Ion Batteries” Electrochim. Acta 2004, 49, 4379.
45. Lee, J. T.; Lin, Y. W.; Jan, Y. S. “Allyl Ethyl Carbonate as an Additive for Lithium-Ion Battery Electrolytes” J. Power Sources 2004, 132, 244. Han, C. C.; Bai, M. Y.; Lee, J. T. “A New and Easy Method for Making Ni and Cu Microtubules and Their Regularly Assembled Structures” Chem. Mater. 2001, 13, 4260.
46. Han, C. C.; Lee, J. T.; Chang, H. “Thermal Annealing Effect on the Structure and Morphology of Micrometer-Sized Carbon Tubes” Chem. Mater. 2001, 13, 4180.
47. Han, C. C.; Lee, J. T.; Yang, R. W.; Chang, H.; Han, C. H. “Formation Mechanism of Micrometer-Sized Carbon Tubes” Chem. Mater. 2001, 13, 2656.
48. Han, C. C.; Lee, J. T.; Yang, R. W.; Chang, H.; Han, C. H. “A New and Easy Method for Making Well-Organized Micrometer-Sized Carbon Tubes and Their Regularly Assembled Structures” Chem. Mater. 1999, 11, 1806.
49. Han, C. C.; Lee, J. T.; Yang, R. W.; Chang, H.; Han, C. H. “A New and Easy Method for Making Well-Organized Micrometer-Sized Carbon Tubes and Their Regularly Assembled Structures” Chem. Mater. 1999, 11, 1806.​
50. Lee, J. T.; Wang, Y. H.; Hung, M. K.; Lin, H. C.; Lin, C. H. “A thin-film electrode and a method for fabricating the same” 2011, pending.
51. Wang, F. M.; Yang, C. R.; Lee, J. T.; Li, C. C.; Chu, Y. J.; Peng X. W. “Energy Storage Devices” 2010 ROC Pub. No. 201021272; P. R. C. Apply No. 200810189429.4
52. Wang, F. M.; Chiang, P. C.; Wu, M. S.; Lee, J. T. “An Energy Storage Device and Package Structure and Method Thereof, 2007, ROC Pat. No. I270093.
53. Wu, M. S.; Pan, J. P.; Lee, J. T.; Wang, F. M.; Tai, S. C.; Chiang, P. C. “Flexible Package Structure and Application Thereof” 2006, ROC Pat. No. I269454.
54. Lin, Y. W.; Pan, J. P.; Wu, M. S.; Lee, J. T.; Hsu, J. M.; Lin, J. C. “High ionic conductivity gel polymer electrolyte for rechargeable polymer secondary battery”, 2006, ROC Pat. No. I251361.
55. Jan, Y. S.; Lee, J. T.; Chen, T.; Wu, M. S. “Positive electrode active material and secondary battery using the same” 2005, ROC Pat. No. 222234, Taiwan.; US Application No. 20050079419, US.
Lee, J. T.; Jan, Y. S.; Lin, Y. W.; Wu, M. S.; Chuang, W. Y. “Ester additives for nonaqueous electrolyte rechargeable cells” 2004, Patent No. 200411971, Taiwan, ROC.